2024_09_02_RECA-UK Catalogue_August_2024

Marking RECA Double Ended Scriber ¤ Knurled handle with steel tip. ¤ Has two points, one at a 90° angle giving improved access for marking in confined spaces. ¤ Length: 250mm

Art. No.: 0705 654 250

RECA Automatic Centre Punch ¤ With all active parts made from hardened steel, the RECA automatic centre punch has a mechanism that automatically strikes a blow when downward pressure is applied - No haer required. ¤ Impact force determined by spring force, no pilot or centre drill required. ¤ Tip hardness 54-58 HRC

¤ Length: 125mm ¤ Diameter: 14mm

Art. No.: 0695 500 602

RECA Chisel and Punch Set

Manufactured from hardened chrome vanadium steel, with a polished surface, both chisels and punches are quenched and tempered, to ensure a longer working life of the tool. Complies to DIN Standards. ¤ Cold chisels are intended for cutting ‘Cold Metal’, i.e. removing waste/chips from metal, when you cannot easily do the same job with other tools like a file, hacksaw or power tool. ¤ Flat cold chisels are mainly used to cut metal bar or rod, but they can be also be used on metal sheet when this is too hard to cut with tin snips ¤ Cross cut chisels are mainly used for cutting grooves and slots.

Set Contains: ¤ 125, 150mm flat cold chisel ¤ 125mm cross cut chisel ¤ 125, 150mm flat cold chisel ¤ 125mm cross cut chisel

Art. No. 0704 190

Reproduction, even in part prohibited. Printed in UK Modified: 27 August 2024

14 36

14 36

All dimensions in millimetres unless otherwise stated