2024_09_02_RECA-UK Catalogue_August_2024

The RECA Catalogue

Section

Contents HSS Drills

01 02 03 04 05 06 07 08 09 10

Masonry & Wood Drills

Saw Blades

Diamond Blades

Abrasive Discs & Finishing Fixings - Screws & Bolts Fasteners - Nuts & Washers

Anchors - Heavy Duty Anchors - Light Duty

Arecal Aerosols 11 Chemicals - Silicones, Sealants & Adhesives 12 Decorating & Janitorial 13 VISO’s & Screwdriver Bits 14 Hand Tools 15 PPE - Health & Safety 16 Welding Supplies 17 Automotive & SCAR Products

The RECA Catalogue - Modified: 27 August 2024

Page No.

Art. No. Prefix

SECTION 01

HSS DRILLS

HSS / Twist Drills HSS / Twist Drills HSS / Cobalt / Inox

Twist, Long Series, Extra Length, Jobber, Stub, Double Ended Ultra Twist Drill, Evo Twist Drill, Ultra Twist Drill, Tip Top Twist Drill Cobalt Drills, Morse Taper, Ultra Inox, Drill Sleeve, Drift Key Long Series - Co, Stub - Co, Extreme Plus Drill. Rotabroach TCT Holesaw, Accerler8 Max Metal Cutters

01 01 - 03 0624-25 / 0629 / 0635-36 01 04 - 07 0617 / 0619 - 0620 - 0623 01 08 - 09 0621 0627 0628 / 3650

HSS / Cobalt

01 10 - 11 0617 / 0629 / 0635

TCT / LDX Cutter

01 12 - 13 0632/ 0896

Rotabor / Rotabroach Supercut Rotabor, TCT Rotabroach, Swarf Collector. Machine Vice

01 14 - 15 0618 / 0695/ 3653

Magnetic Drills HSS Countersink Cone & Step Drills

Rotabroach Commando and Element Series

01 16 - 17 0696

HSS, Cobalt, Ultra TiAIN, Deburring, Counterbore, Countersink Drill Bit 01 18 - 20

0692 / 0617 / 0217

Cone & Step Drills & Sets

01 21 - 22 0692 / 0641

Taps & Dies Taps & Dies Taps & Dies Taps & Dies SECTION 02

Combination Drill/Tap, Tap Wrenches, Hand Taps, HSS TiAIN Set

01 22 - 23 0640 / 0656 / 0657 / 0692 01 24 - 25 0623 / 0640 / 0643 / 1701-2

Machine Taps incl. Aluminium, Ultra & Evo

Machine Tap Sets, Tap & Die Sets Dies, Die Holders, Die Set MASONRY & WOOD DRILLS Speed-tron SDS Plus Hammer Drill

01 26 01 27

0624, 0639 0652, 0659

SDS Drills SDS Drills SDS Drills

02 01 - 02 0648 5 02 03 - 05 0648 4

X-Twin Ultra SDS Plus

Max X-Tron, Max Mega Tron

02 06

0649

SDS Chisels

Chisels - Max & Plus, Evo, Hex Shank

02 07 - 08 0638

Masonry Drills

Percussion & Unicon

02 09 02 10 02 11

0637 / 0650

Core Drills Core Drills

Heavy Duty

0649 0663

Dry Diamond Core Drills & Kit

Holesaws, Wood Drills Bi-metal Holesaws, Kits & Arbors

02 12 - 13 0609 / 0616 02 13 - 15 0616 / 0631

Wood Drills SECTION 03 Jigsaw Blades Jigsaw Blades

Wood Beaver, Auger , Flat Wood Bits, Formwork Drill

SAW BLADES

RECA Jigsaw Blades for Wood

03 01 - 02 0604 03 03 - 04 0604

RECA Jigsaw Blades for Metal & Specialist Materials

Sabre Saw Blades Sabre Saw Blades

RECA Handle for Sabre Saw Blades

03 05

0605

RECA Sabre Saw blades for wood, metal and specialist materials.

03 06 - 07 0605

Ultra Cut

RECA Ultra Cut Blades

03 08 -09

0605

Multi-Tool Accessories Starlock Multicutter Accessories

03 10 - 14 3696

Circular Saw Machines Evolution Circular Saw, Cut Off Saw and Blades

03 15

0696 / 2616

Saw Blades Cutting Sets SECTION 04

RECA Zakko, Bosch, Craftpro & Trend Cutter Sets Trend Cutting Sets for Decorative Woodwork

03 16 -17

2616 / 3696 / 2617

03 18

0616

DIAMOND BLADES

Diamond Blades Diamond Blades Diamond Blades

Diaflex Diamond Blades - Abrasive /Medium Abrasive/Medium Hard 04 01 - 02 0661/ 0664 / 0662

Diaflex Diamond Blades - Hard Materials

04 03 - 04 0661 / 0662 / 0664 04 05 - 07 0661 / 0662 / 0664

Diaflex Diamond Blades - Specialist, Concrete ‘S’ Blades

Diamond Blade Accs

Sharpening stone and RECA No-Key

04 06 04 08 04 09 04 10 04 11 05 01 05 02 05 03 05 04

0664 / 0696

Diamond Drills

Diadrill, Diadrill Ceramic Duo, Diadrill 6 pc Sets

0663

Wet Diamond Cores

Wet Diamond Cores & Green X Diamops and Grinding Cups

0662 / 0663

Diamops

0662 0696

Petrol Saws SECTION 05 Abrasive Belts

Husqvarna & Stihl Petrol Saws & Accessories

ABRASIVE DISCS & FINISHING

Zirconia, Ceramic and Non-Woven Sanding Belt Waterproof Paper Sheets, Hermes Cloth Sanding Belts

2669

Abrasives

0672 - 0673

The RECA Catalogue - Modified: 27 August 2024 00 02 Abrasive Rolls

Surface Conditioning RECA Fluffy Surface Conditioning Disc & Mandrel

0668 0673

Paper & Cloth Rolls

Page No.

Art. No. Prefix

Sanding Discs Sanding Discs Sanding Discs Mirka Range Grinding Mops

Alu Oxide Self Stick, Hook & Loop, Fibre and Zirconium Discs RECAMic Fibre Disc, Ceramic Fibre Discs, RECA Duo Sanding Disc

05 04 - 05 0665 / 0673

05 06 - 08 0665

Fastlock Discs - Ceramic, Webrax, Multiclean

05 09

0668

Mirka Abranet Discs, Abranet Ace, Basecut, Abralon & Goldflex

05 09 - 11 0665 / 0672

Flap Discs: Flex, Ela, F/S, Eco Cermic, R, Clean, Poli, Vlies, D/I, Rondo 05 12 - 14 0666

Fleece Finishing Disc RECA Compact SEG, Grinding Paste

05 15 05 16

0668 - 0674

Finishing Flap Disc

Inox Mop

0666

Cutting Discs Cutting Discs Cutting Discs

RECA Ultra Thin Metal Cutting Discs, Hybrid, 2-in-1, RECAMIC RECA Metal Cutting Discs including specialist & grinding

05 17 - 19 0670

05 20 - 22 0669 / 0670

Multi-Cut Carbide Cutting Disc

05 23 05 24

0670

Abrasive Cutting Discs Proflex Cutting & Grinding Discs

0669 / 0670

Rotary Wire Brushes

Twist Knot & Crimped Wire Brushes, Hand Brushes

05 25 - 26

2695

Bristle Brushes Drum Sanders Rotary Burrs SECTION 06

Grinder Bristle Brushes

05 27

2695 / 0668

Drum Sander, Mops, Sleeves & Belts, Flap Wheels, Abrasive Bands

05 28 - 32 0696 / 0674 / 0675 - 6 7

Abrasive Point Set, Carbide Rotary Burrs & Sets

05 33

0678

FIXINGS - SCREWS & BOLTS Metal to Metal, Plastic to Metal

Sebs - Self Drilling Window Screws Self Tapping Screws Chipboard Screws

06 01 - 06 0211 - 12 /14-15 / 18 - 19 06 07 - 16 0048 / 0185 / 0210 - 18 06 17 - 19 0209 / 0115 - 0123 06 20 - 23 0154 / 0182 / 0186 - 0198

PVC-u Window Screws, Frame Anchors for Metal Windows

Pan & Countersunk in Zinc & Stainless

Torx, Pozi, Yellow Pass.

Wood Screws Wood Screws Drywall Screws Machine Screws Socket Screws

Pozi, Hex Head, Roofing Bolts,

06 24 - 25 0192 3 0231

RAPID® Timber Wood Screw, Hex Head Timber & Decking Screws

06 26 - 27 0160 / 0190 / 6010

Black Phosphate, Zinc, Self Drill, Wafer Head, Collated

06 28 06 29

0189 7

Pan Head, Countersunk Head

0046, 0048

Cap Head - Zinc, Stainless, Countersunk - Zinc, Stainless, Button Head 06 30 - 33 0061 / 0084 -9 / 0092-4

Bolts

BZP Coach bolts, Hex Head Bolts Hex Head, Hex Head Flange

06 34 - 35 0223 / 0053 / 0057 06 36 - 38 0057 / 0096 / 0274

Set Screws

Studding

Threaded Bar, Internally Threaded Socket FASTENERS - NUTS & WASHERS

06 39

0954 - 0959 / 6522

SECTION 07

0317 - 22 / 0342 - 8 / 0356 - 68 / 0391 - 96 0407 - 11 / 0441 / 0453 / 5409 / 0428 - 9

Hexagon Nuts

Full, Nyloc, Wing, Flange, Dome & Shear Nuts

07 01 - 03

Washers

Flat, Spring, Square Plate, Penny, Lock & Nordlock Washers

07 03 - 06

Screws Cups & Caps

Brass Screw Cups & Domecaps

07 07 07 08 07 09

0190 / 0590 0472 / 0470

Pins

Lynch Pins & Split Pins

Wire Nails

Round / Large Clout / Annular / Panel - Bright / Galvanised Metric to Imperial / Tapping drills / Drill Speed / Screws

0478

Conversion Tables

07 10 - 11 -

SECTION 08

HEAVY DUTY ANCHORS

Anchors Anchors Anchors Anchors

Cavity fixings - Probolly, Zip-Fix

08 01 08 02 08 03

0905 0904 0901

Wire hangers Thunderbolts

Sleeve, Shield Anchors

08 04 - 05 0904

Hammer Set Anchor

Drop/Wedge Throughbolts

08 06

0904

Throughbolts

08 07 - 08 0909

Anchors

MKT Highload Anchor

08 09 08 10

0908 0913

Chemical Anchors

Chemical Anchor Studs and Capsules

The RECA Catalogue - Modified: 27 August 2024 Chemical Anchors SECTION 09 Hammer Screws

Chemical Injection Resin including VMU and accessories

08 11 - 14 0911 - 4 / 0898

LIGHT DUTY ANCHORS

Hammer Screws, Metal Nail In Anchors

09 01

0903

00 03

Page No.

Art. No. Prefix

Nylon Anchors

Nylon Plugs, Nylon Frame Anchors

09 01 - 02 0903 - 05 09 02 - 03 0903 / 0905 09 03 - 04 0233 / 0478 09 06 - 08 0937 - 8 09 09 - 14 0948 - 9

Light Duty Anchors Light Duty Anchors Rivets & Rivet Tools Rivet Insert Nuts & Tools Light Duty Anchors Light Duty Anchors

Plastic Plugs, Prodriva

Eco Screws, Cartridge, Plas Pins & Nails

Standard Rivets - Dome, Countersunk, Large Head, Sealed

Insert Type Nuts, Rivet Nut Tools

Cable Ties, Cable Clips, Pipe Clips , Nail In Pipe Clips, Framing Nails, Second Fix Nails, Gas Nailer for Drywall

09 15 - 16 0502 / 0836 / 0861

09 17

0864

SECTION 10

ARECAL AEROSOLS

Topclean, Clean, Uniclean, Novaclean, IPA , Silicon 20, Inox Cleaner , Inox Finish, Cockpit Fresh Air, Insider, POWAIR, Multifunction, Foam Cut, Bio Cut, Long Lub, Tef Clear, Rostex, Rost shock, Thermo 800, Thermo 1200, Lubricant, Multi Grease Galva Zinc, Alu 800, Rust Converter, Weldspray, Primer, Top Coat, 4 in 1 Paint, Primer, Corro Inox, Waterproofing, Site Marker H1 Clean, Silicon, Grease, INOX Finish & Long Lub, H1 Grease Contact Adhesive, Leak Detector, Starter Spray, Pump-up Bottle

Cleaning & Care

10 01 - 04 0895

Lubricating

10 05 - 08 0894 / 0896

Marking & Protecting

10 09 - 13 0897

Arecal Food Safe Miscellaneous

10 14 - 15 0895 - 6

10 16

0892 - 4

SECTION 11

CHEMICALS - SILICONES, SEALANTS & ADHESIVES

Silicone Sealants Specialist Silicones Specialist Silicones Specialist Silicones Specialist Silicones

Unibond Trade, Illbruck & HPSA General Purpose & Sanitary Silicones 11 01 - 04 0898

Fusion Technology

11 05 11 06 11 07

0898 0898 0898

Polyflex, Lead Sheet Sealant, Mortar Repair Duct Sealant Water Base, Flexible Rubber Sealing

Acrylic Caulk, Illbruck Acrylic Sealant, Fire Rated Acrylic & Foam 11 08 - 09 0839

Grab Adhesive

Unibond PL100, PL200 & FT101, Illbruck High Grip, S78

11 10 - 11 0898

Application

Skeleton Guns

11 12 11 13

0891 0898

Foam

Polyurethane Foam

Polyurethane Adhesive Liquid, Fast Set Liquid, Rapid Set PU, Foam Adhesive, Arecal

11 14 - 15 0898

Adhesives Adhesives

PVA Adhesive, CY Adhesive, Contact Adhesive & Adhesive Remover

11 16 11 17 11 18 11 19

0893 / 0898

Arecal 2 Component Adhesive Polyurethane

0894 0894

Methyl Methacrylate Arecal 2-Component Adhesive, Methyl Methacrylate

Wood Fillers

Timbafil, Styrene Free & Cascamite Glue

0898 / 0894

Biscuits, Packers & Shims

Wooden Biscuits, Packers & Horse Shoe Shims

11 20

0618 / 0820

SECTION 12

DECORATING & JANITORIAL

Duct, Cloth, Aluminium, Double Sided, Electrical, Masking, Barrier, Floor Marking

Adhesive Tapes

12 01 - 02 0985

Absorbent Roll

Bumperoll, Toilet Rolls & Resource Rags

12 03 - 04 0892

Hand Cleaners & Care Hand Wipes, Barrier Cream, Hand Cleaner & Dispensers

12 04 - 08 0892 / 0895

Decorating

Brushes, Rollers, Dust Sheets & White Spirit Rubble & Refuse Sacks, Stretch Film Lifting Cushion, Fencing, Pins & Tape VISO’S & SCREWDRIVER BITS

12 09 - 11 0693

Site Ancillaries Site Ancillaries SECTION 13

12 11 12 12

0892 / 0895

0695 - 98 / 0985

VISO Assortments Storage Solutions Screwdriver Bits

Cabinets, Trays & VISO Assortments, Steel Storage Case Workshop Trolley, Professional Tool Bag, Eco Tool Bag, Tool Box RECA Power Bits: Pozi, Phillips, Slotted, Hex, Torx - Singles & Sets

13 01 - 11 0956 - 57

13 12

0700 / 0706

13 13 - 16 0702

Bit Holders & Handle Universal & Quick Change, RECA Handle, Angle Screw Attachment INOX Screwdriver Bits RECA INOX Bits: Phillips, Pozi, Hex, Torx & Nut Setters

13 17 13 18 13 19

0702 / 0605

0702 0702

The RECA Catalogue - Modified: 27 August 2024 00 04 Impact Bits Bit Sets

Phillips, Pozi, Hex, Holder & Sets

Bit & Socket Set, Reamer Set, Ultra Ratchet, Universal Bit Set

13 20 - 21 0702

Page No.

Art. No. Prefix

Drill Chucks SECTION 14

Chucks, Keys & Adaptors

13 21

0691 / 0696

HAND TOOLS

Spanners

Open Ended , Combination & Sets, Ratchet

14 01 - 03 0700 14 04 - 06 0700 14 07 - 08 0700

Socket Sets Socket Sets

4-In-1 Power System, Impact Sockets, 1/4”, 1/2” Sets

Individual Sockets and Accessories

Torque Wrench Screwdrivers

RECA Torque Wrench

14 09

0700 501

Multi, 2C, Ultra & VDE Ultra Screwdriver Blades & Sets Ball Ended, Torx Ended, T Handle, Compact Set RECA Pliers, Wire Strippers, Water Pump Pliers & Plier Sets, Pipe Cutter

14 10 - 14 0701

Hex Keys

14 15

0701

Pliers & Pipe Tools

14 16 - 19 0703

Tin Snips

RECA Compound Tin Snips, Vertical Tin Snips

14 20 14 20 14 21

0703 0700 0703

Adjustable Wrenches RECA 8" & 10" Adjustable Wrenches

Circlip Pliers

For Inner Rings, For Outer Rings

Clamps & Vices

All Screw, Lever, One Handed, Solo, Welding, Sash Engineers Hand Files, Accessories & 6pc Set

14 22 - 23 0695 / 0703 / 2142

Hand Files

14 24 - 26 0695

Clamps

Sash Clamps

14 27 14 27 14 28

0695 0695 0603

Hand Planes

Jack Planes, Smoothing Planes

Hacksaws

RECA Hacksaw Frames & Blades, Mini Hacksaw

Knives Tackers

Trimming Knives & RECA Blades, Snap-off Knives & Blades etc Rapid Tacker, Fine Wire Staples, Hammer Tacker, Flat Wire Staples RECA Measuring Tapes, Chalk Line and Dye, Rule & Ruler

14 29 - 30 0703 14 31 - 32 0580 14 33 - 34 0705

Measuring Measuring Spirit Levels

Digital Vernier Calipers, Engineers Square

14 34 14 35 14 36 14 37 14 38 14 39 14 40 14 41 14 42 14 43

0705 0705

Torpedo 360 , Torpedo, Basic Spirit Level, Premium Level Double Ended Scribers, Auto Centre Punch, Chisel & Punch Set

Scribers & Punches

0695 / 0704 - 0705

Marking Marking

Pro Marker, Deep Hole, Pencils, Duo Marker

0695 0695 0695

Ball Paint Markers, Permanent & Paint Markers, Chalk

Puller

Nail Pullers

Hammers Handsaws

Ultra-Soft Face, Lump, Claw & Ball Pein Hammers

0695 / 0708 0695 / 0981

22” Handsaw, 14” Handsaw

Storage Lighting

Professional Tool Bag, Eco Tool Bag

0700 0981

Torches, Workshop Light, Workshop Lamps, Batteries

Electrical & Power

Alkaline Batteries, RCD Adaptor, Plug, 110V Sockets, 4 Way Splitter, Cable Reels, Extension Leads & Transformers

14 44 - 45 0774

SECTION 15

PPE

RECA Rigger, Thermo Plus, Flexlite, Builders, Cut Level,Welding, Nitrile, Latex , Vinyl.

Gloves

15 01 - 06 0687

Ear Plugs, Cords & Ear Defenders Safety Glasses, Goggles & Lens Cleaner

15 07

0687

Hearing Protection

Eye Protection

15 08 - 09 0687

Safety Helmets, Visors

15 09

0687

Head & Face Protection

Clothing Footwear

Hi-Vis Clothing and Workwear, Protective Mat

15 10 - 12 0687 / 0742 / 0744 - 5

Safety Trainers, Shoes & Boots

15 13

0689

Respiratory Protection FFP1, FFP2 & FFP3 Masks, Respirators

15 14 - 15 0687 15 16 - 17 0686

First Aid Kits SECTION 16

10 & 20 Person, Travel, Van & Truck, Burns & Eyewash, Plasters

WELDING SUPPLIES Welding Wire & Rod Mig Wire, Electrode Rod, Tig Wire

16 01 - 02 0892

Welding Accessories

Bohler Welding Helmets & PAPR AUTOMOTIVE & SCAR PRODUCTS

16 03

0687

The RECA Catalogue - Modified: 27 August 2024 SECTION 17 SCAR Chemicals

SCAR Automotive Aerosols, Cleaning Aerosols, PolyGard Brake Cleaner

17 01 - 03 S8902 - S8919 / 0895-6

00 05

RECA HSS Drills RECA offer a full range of HSS drill bits, all are ground flute and manufactured from 100% high quality blanks. A point angle of 118° ensures pinpoint accuracy on many surfaces and a diameter tolerance of h8 guarantees quality and precision.

RECA HSS Twist Drills DIN 338, ground flute, Type N

¤ Suitable for use on most metals, plastics and wood and available in a wide range of metric sizes and types for varied applications, the drills are ground from a single piece of top-quality high-speed steel, which reduces breaking, blunting and considerably outlasts Carbon and Rolled Drills and gives a much longer tool life. ¤ Drills with diameters of 13mm and above have reduced shank of Dimensions (mm)

Pack Qty

Art. No.

13mm, commonly known as “Blacksmith Drills”. ¤ Pack quantity of 10 unless otherwise stated.

Ø Length Flute

0624 80 0624 81 0624 82 0624 84 0624 85 0624 86 0624 87 0624 88 0624 90 0624 91 0624 95 0624 96 0624 97

8.0 8.1 8.2 8.4 8.5 8.6 8.7 8.8 9.0 9.1 9.5 9.6 9.7

117 117 117 117 117 125 125 125 125 125 125 133 133

75 75 75 75 75 81 81 81 81 81 81 87 87 87 87 87 94 94

5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1

Dimensions (mm) Ø Length Flute

Dimensions (mm) Ø Length Flute

Art. No.

Art. No.

0624 10 1.0 34 0624 14 1.4 40 0624 15 1.5 40 0624 16 1.6 43 0624 18 1.8 46 0624 20 2.0 49 0624 22 2.2 53 0624 23 2.3 53 0624 24 2.4 57 0624 25 2.5 57 0624 26 2.6 57 0624 27 2.7 61 0624 28 2.8 61 0624 30 3.0 61 0624 31 3.1 65 0624 32 3.2 65 0624 33 3.3 65 0624 34 3.4 70 0624 35 3.5 70 0624 36 3.6 70 0624 38 3.8 75 0624 39 3.9 75 0624 40 4.0 75 0624 41 4.1 75 0624 42 4.2 75 0624 43 4.3 80 0624 44 4.4 80 0624 45 4.5 80

12 18 18 20 22 24 27 27 30 30 30 33 33 33 36 36 36 39 39 39 43 43 43 43 43 47 47 47

0624 46 4.6 80 0624 47 4.7 80 0624 48 4.8 86 0624 49 4.9 86 0624 50 5.0 86 0624 51 5.1 86 0624 52 5.2 86 0624 53 5.3 86 0624 55 5.5 93 0624 56 5.6 93 0624 57 5.7 93 0624 58 5.8 93 0624 59 5.9 93 0624 60 6.0 93 0624 62 6.2 101 0624 63 6.3 101 0624 64 6.4 101 0624 65 6.5 101 0624 66 6.6 101 0624 67 6.7 101 0624 68 6.8 109 0624 69 6.9 109 0624 70 7.0 109 0624 71 7.1 109 0624 72 7.2 109 0624 74 7.4 109 0624 75 7.5 109 0624 78 7.8 117 0624 79 7.9 117

47 47 52 52 52 52 52 52 57 57 57 57 57 57 63 63 63 63 63 63 69 69 69 69 69 69 69 75 75

0624 100 10.0 133 0624 102 10.2 133 0624 105 10.5 133 0624 110 11.0 142 0624 115 11.5 142

1 0624 120 12.0 151 101 1 0624 125 12.5 151 101 1 0624 1275 12.75 151 101 1 0624 130 13.0* 151 101 1 0624 135 13.5* 160 108 1 0624 140 14.0* 160 108 1 0624 145 14.5* 169 114 1 0624 150 15.0* 169 114 1 0624 155 15.5* 178 120 1 0624 160 16.0* 178 120 1 0624 165 16.5* 184 125 1 0624 170 17.0* 184 125 1 0624 175 17.5* 184 125 1 0624 180 18.0* 191 130 1 0624 200 20.0* 205 140 1

01 01 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 01 All dimensions in mm unless otherwise stated.

01 01

RECA HSS Drill Cassettes

Drill cassettes plus replacement top ups - Saving you time and money. HSS Drill cassettes give you 2 of each of your popular small diameters (1.0mm to 5.0mm) in a robust metal case that will protect your bits, numbered in size order for easy reference. Art. No Range of Drill Sizes No. of Pieces 0624 004 113 1.0 to 13.0mm 35 0624 004 007 ¹ 1.0 to 5.9mm 50 0624 004 009 ² 1.0 to 10.5mm 30 0624 004 110 1.0 to 10.0mm 29 Increment 0.5 mm ¹ Increment 0.1 mm ² Includes tapping size drills RECA HSS Twist Drill Refill Packet for Plus Cassettes

¤ 23 drill set; 2 of each from 1.0 to 5.0mm, 1 of each from 5.5 to 7.5mm

Art. No.: 0624 001

RECA HSS Twist Drills Long Series

DIN 340, Type N ¤ Long series for metal, right hand drilling. ¤ Optimal drilling capacity with exceptionally long tool life

Art. No.

Ø Length Flute Pack Qty

0629 25 2.5

95

62

10 10 10 10 10 10 10 10 10 10 10 10 10

0629 30 3.0 100 66 0629 32 3.2 106 69 0629 35 3.5 112 73 0629 40 4.0 119 78 0629 42 4.2 119 78 0629 43 4.3 126 82 0629 45 4.5 126 82 0629 48 4.8 132 87 0629 50 5.0 132 87 0629 55 5.5 139 91 0629 60 6.0 139 91 0629 65 6.5 148 97 0629 70 7.0 156 102 0629 75 7.5 156 102 0629 80 8.0 165 109 0629 85 8.5 165 109 0629 90 9.0 175 115 0629 100 10.0 184 121 0629 115 11.5 195 128 0629 120 12.0 205 134 0629 130 13.0 205 134

5 5 5 5 5 5 1 1 1

01 02 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 02 All dimensions in mm unless otherwise stated.

01 02

RECA HSS Extra Length DIN 340, Type N. ¤ Extra Length Series for metal. ¤ Right hand drilling.

Art. No. Ø Length 0629 00140 4.0 175mm 0629 00150 5.0 195mm 0629 00160 6.0 205mm 0629 00180 8.0 240mm 0629 001100 10.0 265mm

¤ Optimal drilling capacity with exceptionally long tool life. ¤ All extra length drills are packed as singles - additional lead times may apply.

RECA Stub HSS Twist ¤ Manufactured to DIN 1897. ¤ Right-hand cutting for most metals. ¤ No centre punching required, does not drift from drilling location. Ideal for drilling thin materials, rivets and self tapping screws. ¤ Box of 10

Art. No.

Ø Length Flute

Art. No.

Ø Length Flute

0635 25 2.50 43 14 0635 48 4.80 62 0635 30 3.00 46 16 0635 49 4.90 62 0635 32 3.20 49 18 0635 50 5.00 62 0635 33 3.30 49 18 0635 51 5.10 62 0635 35 3.50 52 20 0635 52 5.20 62 0635 40 4.00 55 22 0635 55 5.50 66 0635 41 4.10 55 22 0635 60 6.00 66 0635 42 4.20 55 22 0635 100 10.00 89

26 26 26 26 26 28 28 43

0635 45 4.50 58 24

RECA Double End HSS Twist ¤ Right-hand cutting for most metals. ¤ Effectively 20 drills in one pack of 10. ¤ No centre punch required, does not drift from drilling location. Ideal for drilling thin materials & rivet holes. ¤ Box of 10

Art. No.

Ø Length Flute

0636 30 3.00 46 0636 32 3.20 49 0636 33 3.30 49 0636 35 3.50 52 0636 40 4.00 55 0636 41 4.10 55 0636 42 4.20 55 0636 50 5.00 62 0636 51 5.10 62 0636 55 5.50 66 0636 60 6.00 66 0636 65 6.50 70

10.6 11.2 11.2 12.5 14.0 14.0 14.0 17.0 17.0 19.0 19.0 21.2

01 03 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 03 All dimensions in mm unless otherwise stated.

01 03

RECA ULTRA HSS Twist Drill with Tricon shaft

The Ultra HSS twist drill steel combines the best features of others Twist Drills: ¤ 118 ° cutting angle. ¤ Tricon shaft, prevents movement of the drill within the chuck, and enable optimum power transfer to the drill point. ¤ Oxide treated drill chamfer, reduces heat load on the drill, increasing service life ¤ Dimensional stability, enabling the drilling of precise holes. ¤ Low feed and cutting force ¤ This drill is especially suitable for steel up to 1000 N / mm² and cast steel (alloyed and unalloyed), cast iron, malleable cast iron, sintered iron, nickel silver and graphite.

Tricon Shaft

Pack Qty

Art. No.

Ø Length Flute

0617 000 020 2.0 49 0617 000 025 2.5 57 0617 000 030 3.0 61 0617 000 032 3.2 65 0617 000 035 3.5 70 0617 000 040 4.0 75 0617 000 042 4.2 75 0617 000 045 4.5 80 0617 000 050 5.0 86 0617 000 055 5.5 93 0617 000 060 6.0 93

24 30 33 36 39 43 43 47 52 57 57

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

0617 000 065 6.5 101 63 0617 000 068 6.8 109 69 0617 000 070 7.0 109 69 0617 000 075 7.5 109 69 0617 000 080 8.0 117 75 0617 000 085 8.5 117 75 0617 000 090 9.0 125 81 0617 000 095 9.5 125 81 0617 000 100 10.0 133 87 0617 000 102 10.2 133 87 0617 000 105 10.5 133 87 0617 000 110 11.0 142 84 0617 000 115 11.5 142 84 0617 000 120 12.0 151 101 0617 000 125 12.5 151 101 0617 000 130 13.0 151 101

1 1 1 1 1 1 1 1 1 1 1 1

RECA ULTRA HSS Twist Drill Set ¤ 34pc set (1-13mm) ¤ 1.0 - 5.0 x 2pcs, 5.5 – 13.0 x 1pc ¤ 0.5mm increment

Art. No. 0617 004 913

01 04 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 04 All dimensions in mm unless otherwise stated.

01 04

RECA EVO Twist drill

¤ EVO twist HSS drill with TRICON shaft, type N, right-hand cutting, DIN 338, HSS, ground and TiAIN head coating. ¤ 118° EVO blade with cross-ground section for drilling with pin-point accuracy - no centre punch; required. ¤ Dimensional accuracy - precise drill holes; low feed and cutting forces for an energy-saving operation. ¤ The TRICON shaft (from 4mm) offers a positive-fit transmission of forces with no movement in the drill chuck which allows optimal power transfer and no groove formation. ¤ No excessively deep clamping in the drill chuck is required, providing optimal elasticity and low energy expenditure when opening and closing the drill chuck, while also protecting the chuck. ¤ The TiAlN head coating provides maximum service life, with no built-up edges, greater surface hardness, improved thermal stability and dry machining possible. "NUR" coating on the area subjected to the greatest load means greater flexibility and cost-effectiveness. ¤ Suitable for machine taps and countersinks Art. No. Ø Length Flute Pack Qty 0623 000 020 2.0 49 24 10

0623 000 025 2.5 57 0623 000 030 3.0 61 0623 000 032 3.2 65 0623 000 035 3.5 70 0623 000 040 4.0 75 0623 000 042 4.2 75 0623 000 045 4.5 80 0623 000 050 5.0 86 0623 000 055 5.5 93 0623 000 060 6.0 93 0623 000 065 6.5 101 0623 000 068 6.8 109 0623 000 070 7.0 109 0623 000 075 7.5 109 0623 000 080 8.0 117 0623 000 085 8.5 117 0623 000 090 9.0 125 0623 000 095 9.5 125 0623 000 100 10.0 133 0623 000 102 10.2 133 0623 000 105 10.5 133 0623 000 110 11.0 142 0623 000 115 11.5 142

30 33 36 39 43 43 47 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 94

10 10 10 10 10

Application area: ¤ Precision drill for drilling steel up to 1000 N/mm² and cast steel (alloyed and non-alloyed), grey cast iron, malleable cast iron, spheroidal cast iron, sintered iron, nickel silver and graphite.

5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1

RECA EVO HSS Drill Set - 34pc

Set contains: 1.0 - 13mm; ¤ 2x 1.0 to 5.0 ¤ 1x 5.5 to 13.0.

Art. No.: 0623 004 913

0623 000 120 12.0 151 101 0623 000 125 12.5 151 101 0623 000 130 13 151 101

01 05 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 05 All dimensions in mm unless otherwise stated.

01 05

RECA Ultra Twist Drill HSS-O Made from top quality high speed steel giving a much longer tool life, the RECA Ultra Twist drill is manufactured using the latest techniques, which reduces breaking and blunting of the drill tip.

¤ 50% faster than most conventional twist drills 0624. ¤ 135° split point angle, helps to centre the drill accurately and reduce wander. ¤ This point angle is ideal is for sheet steel with reduced burring of edges. ¤ Ideal for drilling in most common materials like mild steel, high tensile steel, stainless steel, aluminium, brass, copper and plastic. ¤ There is a multifunctional steam oxide (FE2 04) coating on the drills which helps a drill to retain lubricant, to help wear resistance of the drill and chip flow. ¤ Quality control is checked after each operation and during final inspection. ¤ Colour coded for easy reference and storage.

Art. No.

Ø Length

Flute Pack Qty

0620 20 2.00 0620 25 2.50 0620 30 3.00 0620 32 3.20 0620 35 3.50 0620 40 4.00 0620 42 4.20 0620 45 4.50 0620 50 5.00 0620 55 5.50 0620 60 6.00

50 57 61 65 70 75 75 80 86 93 93

25 30 33 36 39 43 43 47 52 57 57 63 69 69 69 75 81 87 87 87 94

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

0620 65 6.50 101 0620 68 6.80 109 0620 70 7.00 109 0620 80 8.00 117 0620 90 9.00 125 0620 100 10.00 133 0620 102 10.2 133 0620 105 10.50 133 0620 110 11.00 142 0620 75 7.5 109

RECA Ultra Twist Drill Set

1 1 1 1 1 1 1 1 1 1 1 1 1

¤ 28 pc set 2.5-13mm ¤ 2 x 2.5-5mm, 1 x 5.5-13mm

Art. No.: 0620 004 213

0620 120 12.00 151 101 0620 130 13.00 151 101 0620 135 13.5 160 108 0620 140 14.0 160 108 0620 145 14.5 169 114 0620 155 15.5 178 120 0620 160 16.0 178 120

01 06 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 06 All dimensions in mm unless otherwise stated.

01 06

RECA Tip Top Twist Drill HSSX-O

¤ A universal model for precise centring - the drill almost never runs off centre and it is even possible to perform angled spot drilling - exceptional drilling progress with multiple cutting edges in use at the same time and minimal energy expenditure required. ¤ The drill does not hook into the material making it effortless to drill out existing holes and circular holes even in sheet metal machining. ¤ Manufactured from the latest generation HSSX base material which offers maximum flexibility and heat strengthening in one tool, meaning more material types can be processed.

Overall Length

Flute Length

Pack Qty

Art. No.

Ø

¤ The multifunctional steam oxide (Fe2 O4) coating is an adhesive oxide coating with a thickness of 0.010 mm offering improved adhesion of cooling lubricant on the tool surface - preventing built-up edges and cold shuts - and improving chip discharge from the cutter resulting in reduced heat development in the critical zone. ¤ Increased surface hardness - thus improved wear resistance. ¤ Tip Top tips of 3.0 mm and above. TRICON shaft of 4.0 mm and above. ¤ A TRICON shaft prevents spinning in the drill chuck, eliminating damage to the drill bit and ensures the drill is securely and firmly clamped, particularly in the quick-action drill chuck. These features all result in optimal power transmission to the tip where the power is needed. Field of Application: Steel, stainless steel, aluminium, plastic, non-ferrous metals, cast iron, unalloyed heat treated steels, hardwood, and softwood etc.

0619 000 020 2.0 0619 000 025 2.5 0619 000 030 3.0 0619 000 032 3.2 0619 000 033 3.3 0619 000 035 3.5 0619 000 040 4.0 0619 000 042 4.2 0619 000 045 4.5 0619 000 050 5.0 0619 000 052 5.2 0619 000 055 5.5 0619 000 060 6.0

49 57 61 65 65 70 75 75 80 86 86 93 93

24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 94

10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1

0619 000 065 6.5 101 0619 000 068 6.8 109 0619 000 070 7.0 109 0619 000 075 7.5 109 0619 000 080 8.0 117 0619 000 085 8.5 117 0619 000 090 9.0 125 0619 000 095 9.5 125 0619 000 100 10.0 133 0619 000 102 10.2 133 0619 000 105 10.5 133 0619 000 110 11.0 142 0619 000 115 11.5 142 0619 000 120 12.0 151 0619 000 125 12.5 151

101 101 101

0619 000 130 13

151

Art. No.

Size

*0619 004 913 ** 0619 004 410

Set contains: 1.0 - 13mm

**

*

4mm, 5mm, 6mm, 8mm, and 10mm

01 07 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 07 All dimensions in mm unless otherwise stated.

01 07

RECA HSS Cobalt Drills

RECA offer a full range of HSS Cobalt drill bits, all are ground flute and manufactured from 100% high quality blanks. A point angle of 118° ensures pinpoint accuracy on many surfaces and a diameter tolerance of h8 guarantees quality and precision.

¤ Optimum drilling precision and cleanliness due to pin-point accuracy, offering maximum performance and precision through professional development of INOX geometry. ¤ A stronger drill core offers high stability for better strength and a more balanced drill bit. ¤ Manufactured from a special alloy containing more cobalt, increased heat stability and high precision is acheiveable even at maximum operational limits. ¤ The INOX twist profile with its special helix ensures smooth drilling, improved swarf removal and less jamming. Art. No. Ø Length Flute Pack Qty Art. No. Ø Length Flute Pack Qty 0621 020 2.00 49 24 10 0621 065 6.50 101 63 5 0621 025 2.50 57 30 10 0621 070 7.00 109 69 5 0621 030 3.00 61 33 10 0621 075 7.50 109 69 5 0621 032 3.20 65 36 10 0621 080 8.00 117 75 1 0621 033 3.30 65 36 10 0621 085 8.50 117 75 1 0621 035 3.50 70 39 10 0621 090 9.00 125 81 1 0621 040 4.00 75 43 10 0621 095 9.50 125 81 1 0621 042 4.20 75 43 10 0621 100 10.00 133 87 1 0621 045 4.50 80 47 10 0621 105 10.50 133 87 1 0621 050 5.00 86 52 10 0621 110 11.00 142 94 1 0621 055 5.50 93 57 10 0621 120 12.00 151 101 1 0621 060 6.00 93 57 10

0621 125 12.50 151 101 1 0621 130 13.00 151 101 1

RECA Morse Taper Shank Drills

Art. No.

Ø Length Flute Pack Qty

0628 120 12.00 182 101 0628 130 13.00 182 101 0628 140 14.00 189 108 0628 145 14.50 212 114 0628 150 15.00 212 114 0628 160 16.00 218 120 0628 165 16.50 223 125 0628 170 17.00 223 125 0628 180 18.00 228 130 0628 190 19.00 233 135 0628 200 20.00 238 140 0628 210 21.00 243 145 0628 220 22.00 248 150 0628 250 25.00 281 160 0628 260 26.00 286 165

1 1 1 2 2 2 2 2 2 2 2 2 2 3 3

¤ HSS DIN 345 with 118° standard point. ¤ The Morse taper allows the drill to be mounted directly into the spindle of the machine - bench, pedestal and floor drills - giving higher torque transmission into the work piece. ¤ Suitable for drilling of steel and cast steel (alloy or non alloy), grey iron and malleable cast iron. ¤ Larger sizes from 26mm available in MT3/4 on request.

01 08 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 08 All dimensions in mm unless otherwise stated.

01 08

RECA Ultra Inox Drill

¤ DIN388 HSS-CO5% HSS Cobalt drill with Tricon shaft ¤ 135° turbo cutter, helps to centre drill accurately and reduce wander meaning no centre punch required. ¤ TRICON SHAFT, prevents movement of drill within the drill chuck, and enables optimum power transfer to the drill point. (from 4.00mm). ¤ Black and gold heat surface treatment, helps reduce thermal load on the drill, helping to extend the drill life. (from 3.00mm). ¤ This drill is especially suitable for hard materials such as HARDOX® 500, A2 & A4 stainless or titanium with a strength of up to 850n/mm². ¤ Optimal performance on material up to 5mm thick. RECA Ultra Twist Drill Set

Art. No.

Ø Length Flute Pack Qty

0627 000 020 2.0 49 0627 000 025 2.5 57 0627 000 030 3.0 61 0627 000 032 3.2 65 0627 000 033 3.3 65 0627 000 035 3.5 70 0627 000 040 4.0 75 0627 000 042 4.2 75 0627 000 045 4.5 80 0627 000 050 5.0 86 0627 000 055 5.5 93 0627 000 060 6.0 93 0627 000 065 6.5 101 0627 000 068 6.8 109 0627 000 070 7.0 109 0627 000 075 7.5 109 0627 000 080 8.0 117 0627 000 085 8.5 117 0627 000 090 9.0 125 0927 000 095 9.5 125 0627 000 100 10 133 0627 000 102 10.2 133 0627 000 105 10.5 133 0627 000 110 11.0 142 0627 000 115 11.5 142

24 30 33 36 36 39 43 43 47 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 94

10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1

¤ 34 pc set 2.5-13mm ¤ 2 x 1-5mm, 1 x 5.5-13mm

Art. No.: 0627 004 913

0627 000 120 12.0 151 101 0627 000 125 12.5 151 101 0627 000 130 13.0 151 101

Morse Taper Drill Sleeve

Drift Key

To reduce hole size of machine spindle where the drill shank is smaller than the spindle hole.

Used to help ejection of tapered tools from machine spindles, quickly and easily.

Art. No.

Outside Inside

Art. No.

Size

3650 548 21 3650 548 32

3650 562 12 3650 562 3

2 3

1 2

MT1 & 2

MT3

01 09 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 09 All dimensions in mm unless otherwise stated.

01 09

RECA HSS Twist Drills Long series – Co

Twist drill with straight shank, long, bare, type N, right-hand cutting, DIN 340, toler ance h8, HSS-Co 5% Advantages: ¤ For drilling work on deep-set areas ¤ Perfectly suited to machining tough and thick-walled materials ¤ Exceptional thermal hardness resistance for maximum service life ¤ Perfectly suited for use in hand-held, pillar and upright drills Also suitable for CNC machines. Application area: High-performance drill with marked thermal hardness resistance. For drilling alloyed and non-alloyed steels and cast materials with strengths in excess of 800 N/mm², in particular stainless steels, high-alloy steels.

Art. No.

Ø Length Flute Pack Qty

Art. No.

Ø Length Flute Pack Qty

0629 500 030 3.0 100 0629 500 032 3.2 106 0629 500 035 3.5 112 0629 500 040 4.0 119 0629 500 042 4.2 119 0629 500 045 4.5 126 0629 500 050 5.0 132 0629 500 055 5.5 139

66 69 73 78 78 82 87 91

10 10 10 10 10 10 10 10

0629 500 060 6.0 139 0629 500 065 6.5 148

93 97

5 5 5 5 1 1 1 1

0629 500 070 7.0 156 102 0629 500 080 8.0 165 109 0629 500 100 10.0 184 121 0629 500 110 11.0 195 128 0629 500 120 12.0 205 134 0629 500 130 13.0 205 134

RECA Stub Twist Drill HSS- Co

¤ Twist drill HSS-Co 5%, DIN 1897, type N, ¤ No centre punching required, does not drift from drilling location ¤ Ideal for drilling thin materials, for rivets and self-drilling screws Field of Application: ¤ For drilling alloyed and non-alloyed steels with strengths in excess of 800 N/mm², in particular stainless steels, high-alloy steels and heat-treatable steels and case-hardened steels.

Art. No.

Ø Length Flute Pack Qty

Art. No.

Ø Length Flute Pack Qty

0635 000 030 3.00 46 16 0635 000 032 3.20 49 18 0635 000 033 3.30 49 18 0635 000 035 3.50 52 20 0635 000 040 4.00 55 22 0635 000 041 4.10 55 22

10 10 10 10 10 10

0635 000 042 4.20 55 22 0635 000 045 4.50 58 24 0635 000 049 4.90 62 26 0635 000 050 5.00 62 26 0635 000 052 5.20 62 26

10 10 10 10 10

01 10 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 10 All dimensions in mm unless otherwise stated.

01 10

RECA Extreme Plus Drill The drill bit for the toughest materials! ¤ DIN 338 type H, right-hand cutting, ground, multi-layer (TiAlN)-ZrN coating, HSS-Co 8%, 135° turbo cutter ¤ HSS-Co 8% - M42 cutting material — extremely long service life ¤ Multi-layer ZrN coating (zirconium nitride) which enhances thermal stability ¤ No centre punching necessary ¤ Can be used for drilling on curved surfaces

Application: ¤ Suitable for HARDOX® 500 (for HARDOX 550 preliminary testing is required) and for very hard materials up to 1700 N/mm² such as excavator shovels, lorry superstructures, snowploughs, agricultural machines, armour plating etc. Materials up to 1400 N/mm² can be processed using hand drills. Advice: ¤ Prerequisites for drilling HARDOX®: Stability is crucial. Hand drills are not suitable for drilling Hardox. Minimise the distance between the drill and the work piece and clamp the work piece firmly. Reduce feed rate shortly before drilling through and ensure recommended feed rate and cutting speed are maintained. Art. No. Ø Length Flute Pack Qty 0617 800 030 3.0 61 16 5 0617 800 040 4.0 75 22 5 0617 800 050 5.0 86 26 5 0617 800 060 6.0 93 28 5 0617 800 068 6.8 109 34 5 0617 800 070 7.0 109 34 1 0617 800 080 8.0 117 37 1 0617 800 085 8.5 117 37 1 0617 800 100 10.0 133 43 1 0617 800 102 10.2 133 43 1 0617 800 115 11.5 142 47 1 0617 800 120 12.0 151 51 1 0617 800 130 13.0 151 51 1

01 11 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 11 All dimensions in mm unless otherwise stated.

01 11

Rotabroach TCT Cutter A portable cutter for the working professional, an extremely productive tool that is a cost effective alternative to twist drills and broaching cutters. ¤ Manufactured with high quality solid carbide tips, for maximum performance and reliability. ¤ High quality centre drill spring loaded, for fast waster material ejection. ¤ Used in conjunction with drill chuck. ¤ Cutting depth 15mm. ¤ Max tensile strength <1400n/mm². ¤ Ideal for use on structural steel, stainless steel and pipework. ¤ Other size available POA

Art. No.

Size (mm)

0632 002 114 0632 002 116 0632 002 118 0632 002 120 0632 002 122 0632 002 125

14 16 18 20 22 25

Arecal Cutting Oils Arecal Bio Cut Cutting Oil ¤ A high-grade cutting oil whose contents are fully bio-degradable. Free from mineral oil residues. ¤ Allows for longer tool life. Reduces risk of breakage. ¤ Also available in a 10 litre container

Arecal Foam Cut ¤ A foaming high

performance cutting oil for most metal cutting tasks. When sprayed, an oily foam is produced which has good adhesion when applied.

Art. No.: 0896 413 400 (400ml) Art. No.: 0896 630 10 (10 litre)

Art. No.: 0896 414 400 (400ml)

01 12 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 12 All dimensions in mm unless otherwise stated.

01 12

Acceler8% Max Metal Cutters The ultimate solution to drilling metal - the perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. An extremely productive tool that is a cost effective alternative to broaching cutters; for cutting steel plate, iron, aluminium, copper, cast iron, stainless steel, FRP (i.e. Fibreglass) and plastics. ¤ Special tungsten carbide teeth offering excellent wear & heat resistance to cut stainless steel & tough alloys. Relief angle enhances discharge of metal chips for smooth cutting. ¤ Triple edge cutting system - features two sets of three cutting blades, each with different geometries. This unique system balances the cutting forces, enabling rapid, smooth drilling with better control. ¤ One piece construction - no assembly required. ¤ Ejector spring ejects the slug to save time and the safety collar stop prevents over penetration for safer, faster operation. ¤ Speed - Penetrates steel many times faster than standard bi-metal holesaws. ¤ Life - On tests, drilling into stainless steel, LDX metal cutters drilled over 350 holes compared to a maximum of 10 holes gained from two alternative holesaws. ¤ Usage - LDX metal cutters can be used on standard portable power tools. Run on rotation only, any power tool with a range of 500 to 800rpm can be utilised. System is fully portable with no need for special equipment. ¤ Applications - switch boxes, metal studs, electrical applications, lighting fixtures, body repair, truck body repair, trailer frames, ductile pipe, steel fabrications and structural steel. ¤ Larger sizes from 26mm available in MT3/4 on request.

Smooth Cutting Geometry

1. Cutting Angle

2. Relief Angle

Size (mm) Long Series Art. No. 25.00mm Cutting Depth 14.0 0632 405 014 0632 425 014 16.0 0632 405 016 18.0 0632 425 018 19.0 0632 425 019 20.0 0632 405 020 0632 425 020 22.0 0632 405 022 0632 425 022 25.0 0632 405 025 0632 425 025 28.0 0632 425 028 30.0 0632 425 030 32.0 0632 405 032 0632 425 032 35.0 0632 425 035 38.0 0632 425 038 40.0 0632 425 040 45.0 0632 425 045 50.0 0632 425 050 Short Series Art. No. 4.75mm Cutting Depth

Art. No. Description 0632 405 001 Replacement Pilot (SHORT) 0632 425 001 Replacement Pilot (LONG) 0632 405 002 Replacement Spring (SHORT) 0632 425 002 Replacement Spring (LONG)

Speed Recommendation

Size

Steel (rpm)

Stainless (rpm)

14.0 to 20.0mm 700-1000 22.0 to 30.0mm 500-800 32.0 to 40.0mm 300-600 41.0 to 50.0mm 200-500 51.0 to 60.0mm 200-400

300-700 200-450 175-315 120-225 95-195

01 13 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 13 All dimensions in mm unless otherwise stated.

01 13

Supercut Rotabor Cutters

M2 Supercut Rotabor Cutters

30mm Short Cutters *

60mm Long Cutters †

Dia.

¤ Supercut Rotabor cutters are an industry standard range of M2 cutters. ¤ Designed, manufactured and inspected in England by a BSI registered firm. ¤ Approved inspection procedures fulfil the requirements specified by the British Standards EN ISO 9002 certificate. ¤ Supercut Rotabor cutters are used for boring clean, accurate holes through many metals ‡ including mild steel, high tensile steel, brass and aluminium. ¤ Rotabor cutters can be used in most metal working and fabricating industries. Main market sectors include steel erectors, steel building services, welders, fabricators, pressure vessel and pipework contractors. ¤ Unique patented ‘chipbreaker’ form allows faster swarf removal and gives longer tool life. ¤ Full range of cutters from 12mm to 60mm available with all popular sizes normally stocked. ¤ Excellent range of accessories available including pins, countersinks, Morse taper adaptors and both large and small magnetic based drilling machines. ¤ Articles shown are generally available from stock. Cutters from 12mm to 100mm in 1mm increments that are not listed above can be ordered on request.

12 mm 0618 611 012 13 mm 0618 611 013

14 mm 0618 611 014 0618 621 014 15 mm 0618 611 015 0618 621 015 16 mm 0618 611 016 0618 621 016 17 mm 0618 611 017 18 mm 0618 611 018 0618 621 018 19 mm 0618 611 019 0618 621 019 20 mm 0618 611 020 0618 621 020 21 mm 0618 611 021 0618 621 021 22 mm 0618 611 022 0618 621 022 23 mm 0618 611 023 - 24 mm 0618 611 024 0618 621 024 25 mm 0618 611 025 0618 621 025 26 mm 0618 611 026 0618 621 026 27 mm 0618 611 027 0618 621 027 28 mm 0618 611 028 0618 621 028 30 mm 0618 611 030 0618 621 030 32 mm 0618 611 032 0618 621 032 34 mm 0618 611 034 35 mm 0618 611 035 36 mm 0618 611 036 38 mm 0618 611 038 40 mm 0618 611 040 0618 621 040 42 mm 0618 611 042 45 mm 0618 611 045 50 mm 0618 611 050 0618 621 050

Accessories

0618 610 001 0618 620 001

Short Pin

Long Pin 0618 610 003 Short Pin for 12mm Cutter Only 0618 700 030 Small Counterink 30mm 0618 700 050 Large Countersink 50mm 0618 255 010 No. 2 Morse Taper Adaptor 0618 255 011 No. 3 Morse Taper Adaptor 0618 610 002 Short Cutter Bolt Kit In Metal Case (2x14, 2x18, 2x22mm + Pilot)

52 mm 0618 611 052 56 mm 0618 611 056 60 mm

0618 621 060

Drill Depth: *25.00mm †50.00mm

M42 Supercut Rotabor Cutters Short Cutters 30mm Length

Dia.

Art. No.

12 14 18 22

0618 612 012 0618 612 014 0618 612 018 0618 612 022

01 14 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 14 All dimensions in mm unless otherwise stated. ‡ Different base materials require different speed (RPM) and feed rates.

01 14

TCT Rotabroach Cutters Short Series

¤ Manufactured with highest quality carbide tips, for a long life in the toughest materials. ¤ The tips are 50% tungsten, 50% carbide and are therefore able to resist high temperatures, helping to extend the tool life. ¤ The 3 tooth geometry provides even tooth loading for a smooth and vibration free cut. ¤ The TCT cutters have unique spiral flutes, for fast material removal. ¤ Max tensile strength <1400N/mm². ¤ Ideal for use on construction steel, stainless steel, high strength steel, hard ox (dependent on grade) and Inconel. ¤ Short series (35mm D.O.C), and long series (50mm D.O.C) POA. ¤ Other sizes available POA. Dia Art. No. 14mm 0618 613 014 18mm 0618 613 018 20mm 0618 613 020 22mm 0618 613 022 26mm 0618 613 026 30mm 0618 613 030 Evolution Cyclone Swarf And Chip Collector ¤ Push rod to magnetise, wave over ferrous metal filings which adhere to the cyclone. Withdraw rod to release filings into an appropriate scrap area. ¤ Clean working area with no effort. Excess filings can affect magnet performance on drills! Art. No. Description 0618 610 004 Short pin for TCT Cutter 12-17mm 0618 610 005 Short pin for TCT Cutter 18-52mm

Art. No. 0695 902 001

Machine Vice ¤ Secure reliable and quick clamping of work pieces on drills and measuring machines.

¤ Solid and handy version, with a cast metal body. ¤ Thread spindle covered by a protective sleeve. ¤ Long mounting slots. ¤ Moveable jaw with guide. ¤ Solid clamping jaw with three vertical prisms and one horizontal prism. ¤ Both jaws with support for clamping flat work pieces. Art. No. Jaw width Jaw Height

Clamping Capacity Height

Weight

3653 732 100 100 mm

30mm

92mm

63.5mm 4.3kg

01 15 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 15 All dimensions in mm unless otherwise stated.

01 15

Magnetic Drills Rotabroach Commando 40 Machine

Rotabroach’s most economical machine, ideal for an intermittent user of broaching cutters. Suitable for drilling holes in ferrous metal while the base magnet holds the drill securely in place.

¤ Suitable for drilling up to 40mm diameter and 50mm depth. ¤ Complete with a 13mm drill chuck. ¤ Twist drill capacity 13mm. ¤ Supplied in a protective carry case complete with safety strap and hex keys. ¤ High density magnet for maximum adhesion. ¤ Reversible handles for use in awkward situations. ¤ “No Volt Release” switch for improved safety handling. ¤ 12 months user confidence warranty. Art. No.: 0696 998 601 (110V) Rotabroach Element 50 Low Profile Machine

Rotabroach are proud to launch the largest capacity low profile mag drill on the current market. Its small height, powerful motor and 50mm cutter capacity make it ideal for working in confined spaces and for everyday drilling requirements.

¤ Cutting diameter and depth of cut to 50mm. ¤ 1200w motor with variable, 6 speed setting. ¤ Fitted with Cutsmart technology, designed to increase tool life. ¤ An easy to read panel that indicated when you are drilling with too much force. ¤ Able to counter sink to 30mm (requires extension arbor RD3209).

Art. No.: 0696 998 602 (110v)

Specifications

COMMANDO 40 510 X 180 X 265mm

ELEMENT 50 179 x 100 x 329

H x W x D

Weight

14.2kg 1100W 8000N

11kg

Motor Input Power Magnetic Adhesion

1200w

10,000N

Speed (no load) Cutter Capacity

270-610rpm

250 - 500rpm

12-40mm

50mm

Twist Drill Capacity

13mm

- -

Arbor

19.05 Wheldon

01 16 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 16 All dimensions in mm unless otherwise stated.

01 16