2024_09_02_RECA-UK Catalogue_August_2024

Engineers Hand File

Engineers Hand File Flat DIN 7261 Form A

¤ The ideal geometry of the file cut (ideal cutting angle, even tooth height and even tooth spacing) ensures a clean surface of the workpiece and saves time-consuming rework. ¤ Enables a good chip evacuation and thus prevents the workpiece from being scratched. ¤ A long service life is achieved using quality steel and careful hardening. ¤ The conically shaped tang ensures that the file sits firmly in the handle. Note ¤ Cut 1 = coarse cut for roughing work and larger chip removal as well as for soft material. ¤ Cut 2 = medium cut. ¤ Cut 3 = fine cut for all fine and deburring work as well as for harder metals.

Art. No.

Cut Length Broad Thickness

0695 600 000 1 150 0695 600 001 1 200 0695 600 002 1 250 0695 600 003 1 300 0695 600 005 2 150 0695 600 006 2 200 0695 600 007 2 250 0695 600 008 2 300 0695 600 010 3 150 0695 600 011 3 200 0695 600 012 3 250 0695 600 013 3 300

16 20 25 30 16 20 25 30 16 20 25 30

4 5 6 4 5 6 4 5 6

6.5

6.5

6.5

Engineers Hand File Round DIN 7261 form F

¤ The ideal geometry of the file cut (ideal cutting angle, even tooth height and even tooth spacing) ¤ Ensures a clean surface of the workpiece and saves time-consuming rework. ¤ Enables a good chip evacuation and thus prevents the workpiece from being scratched. ¤ A long service life is achieved using quality steel and careful hardening. ¤ The conically shaped tang ensures that the file sits firmly in the handle. Note ¤ Cut 1 = coarse cut for roughing work and larger chip removal as well as for soft material. ¤ Cut 2 = medium cut. ¤ Cut 3 = fine cut for all fine and deburring work as well as for harder metals. Art. No. Cut 0695 600 040 1 0695 600 043 1 0695 600 045 2 0695 600 041 1 7.5 0695 600 042 1 9.5 12 6 0695 600 046 2 7.5 0695 600 047 2 9.5 6

Dia Length

150 200 250 300 150 200 250 300 150 200 250

0695 600 048 2 0695 600 050 3

12

6

0695 600 051 3 7.5 0695 600 052 3 9.5

Reproduction, even in part prohibited. Printed in UK Modified: 27 August 2024

14 24

14 24

All dimensions in millimetres unless otherwise stated