2024_09_02_RECA-UK Catalogue_August_2024

Chemical Anchor Studs and Capsules

Designed for use when fixing with chemical resins or glass capsules. ¤ Stress free fixing allows closer to the edge fixings, and smaller spacing’s.

How To Install 1. Drill correct size hole. 2. Clean hole thoroughly. 3. Insert capsule into cleaned hole. 4. Drive stud into capsule, chisel end first. 5. Ensure the sud is set into capsule up to setting mark. 6. Carefully release setting stool and allow full curing time before tightening.

Zinc Studs (c/w nuts, washers and setting tool)

Thread Ø (mm)

Max. fixture thickness

Box Qty

Art. No.

Length

0913 998 008 0913 998 010 0913 998 012 0913 998 016 0913 998 020

M8

18mm 110mm 10 25mm 130mm 10 34mm 160mm 10 45mm 190mm 10 55mm 260mm 5

M10 M12 M16 M20

Stainless Steel Studs A2 (c/w nuts, washers and setting tool)

Thread Ø (mm)

Max. Fixture thickness

Box Qty

Art. No.

Length

0913 999 008 0913 999 010 0913 999 012 0913 999 016 0913 999 020

M8

18mm 110mm 10 25mm 130mm 10 34mm 160mm 10 45mm 190mm 10 55mm 260mm 5

M10 M12 M16 M20

Capsules

Concrete Temperature Curing Time Over 20ºC 10 min 10ºC - 20ºC 20 min 0ºC - 10ºC 1 Hour

Art. No. 0913 008 0913 010 0913 012 0913 016 0913 020

Capsule (mm) Drill Ø (mm) Hole Depth (mm) Box Qty

M8

10mm 12mm 14mm 18mm 25mm

80 90

10 10 10 10

M10 M12 M16 M20

110 125 170

6

Reproduction, even in part prohibited. Printed in UK Modified: 22 August 2024 08 10 08 10

08 10