2024_09_02_RECA-UK Catalogue_August_2024

Hammer set Anchor E/ES - Drop/wedge Anchor

The hammerset anchor type E is a drop-in anchor for anchoring in concrete. Anchor type ES lipped for installations in a bottomless hole. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. ¤ Approved for multiple attachment in cracked and non-cracked concrete ¤ Approved for multiple attachment in hollow pre-stressed concrete plate ceilings ¤ Approved for use as a single anchor for fixing in non-cracked concrete (anchoring depth ≥ 30 mm) ¤ Low drilling depth means a low risk of hitting reinforcements (anchoring depth 25 mm) Applications Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel and profiled steel.

Anchor size and length

Drill hole depth

Art. No.

Type

Drill size

Box qty

0904 88 0904 810 0904 812 0904 816

E E E E

8 x 30mm 10 x 40mm 12 x 50mm 16 x 65mm 8 x 30mm 10 x 40mm 12 x 50mm 16 x 65mm

10mm 12mm 15mm 20mm 10mm 12mm 15mm 20mm

30mm 40mm 50mm 65mm 30mm 40mm 50mm 65mm

100

50 50 25 50 50 25

0904 808 030 0904 810 040 0904 812 050 0904 816 065

ES ES ES ES

100

0904 808 0904 801 0 0904 801 2 0904 801 6

Setting Tool for E/ES 8 x 30 Setting Tool for E/ES 10 x 40 Setting Tool for E/ES 12 x 50 Setting Tool for E/ES 16 x 65

Technical Data Available Upon Request

Installation guide:

1. Drill correct size hole 2. Clean hole thoroughly 3. Place the anchor into the hole

4. Set using setting tool 5. Insert bolt and tighten

Reproduction, even in part prohibited. Printed in UK Modified: 22 August 2024 08 06 08 06

08 06