2024_09_02_RECA-UK Catalogue_August_2024

Wire Hangers

An all steel expansion anchor for simple fast installation of cables and suspended ceilings ¤ Hole diameters: 6mm ¤ Split three ways for even stress distribution within the concrete.

Art. No. Box Qty 0904 950 605 6 x 60mm 100 Size

Technical Substrate

Concrete C20/25

Size

6mm 6mm

Drill Hole dia

Embedment Depth Drill Hole Depth Rec Tensile Load

45mm 50mm 1.25kN

Installation guide:

1. Drill hole to specified size.

3. Tap anchor into concrete.

4. Set anchor using a claw hammer.

2. Brush and blow out to clean hole.

Thunderbolts

Installation guide:

1. Drill hole in substrate, using correct diameter, ensuring the hole is deep enough to accommodate dust caused by threading action.

2. Remove any loose dust from the hole.

3. Screw in the Thunderbolt with a socket wrench. Apply a slight downward pressure to start the self tapping action.

4. Tighten the Thunderbolt until the fixture is in place. If resistance is met, unscrew one turn and re-tighten. Do not over tighten.

5. For optimum performance, a torque wrench should be used. Do not exceed tightening torque shown below.

Reproduction, even in part prohibited. Printed in UK Modified: 22 August 2024 08 02 08 02

08 02