2024_09_02_RECA-UK Catalogue_August_2024

Spindle Sander

Abrasive Flap Wheel ¤ For grinding and shaping steel, stainless steel, non ferrous metals, plastics and wood. Especially effective for grinding and smoothing in inaccessible areas such as pipes, box sections and tanks. ¤ Use on forged steel, malleable cast iron, cast iron, non ferrous metals, stainless steel and wood. Pack of 5

Recommended RPM

Recommended RPM

Art. No.

Size (mm)

Grit

Art. No.

Size (mm)

Grit

0675 030 60 30 x 10 x 6 60 0675 030 80 30 x 10 x 6 80 0675 030 120 30 x 10 x 6 120 0675 040 60 40 x 20 x 6 60 0675 040 80 40 x 20 x 6 80 0675 040 120 40 x 20 x 6 120

16,000 16,000 16,000 12,000 12,000 12,000

0675 060 60 60 x 30 x 6 60 0675 060 80 60 x 30 x 6 80 0675 060 120 60 x 30 x 6 120 0675 080 60 80 x 50 x 6 60 0675 080 80 80 x 50 x 6 80 0675 080 120 80 x 50 x 6 120

8,000 8,000 8,000 6,000 6,000 6,000

Nylon & Paper Combination Flap Wheel ¤ For low vibration sanding and finishing. Cleans dirt and light rust or oxidisation. Polishes to a matt or satin finish. ¤ Use on forged steel, malleable cast iron, cast iron, non-ferrous metals, stainless steel and wood. Pack of 5

Recommended RPM

Art. No.

Size (mm)

Grit

0675 140 206 40 x 20 x 6 180/150 0675 150 306 50 x 30 x 6 180/150 0675 160 406 60 x 40 x 6 180/150 0675 180 506 80 x 50 x 6 180/150

7,500 6,000 5,000 4,000

Nylon Flap Wheel ¤ For fine finishing and polishing. Cleans dirt and very light rust or oxidisation. Leaves an even surface with high shine. ¤ Used on forged steel, malleable cast iron, cast iron, non-ferrous metals, stainless steel and wood. Pack of 5

Recommended RPM

Art. No.

Size (mm)

Grit

0675 240 206 40 x 20 x 6 180 0675 250 306 50 x 30 x 6 180 0675 260 406 60 x 40 x 6 180 0675 280 506 80 x 50 x 6 180

7,500 6,000 5,000 4,000

05 31 - Reproduction, even in part prohibited. Printed in UK Modified: 27 August 2024 All dimensions in millimetres unless otherwise stated

05 31

05 31